• Installation Guide - Tempo/Precedent

  Tools required: Drill T15 & T30 drill bits Pliers Cleaning towel/Cloth IOTee TeeBox & Fixings Installation Time: 3 minutes per cart Wiring DiagramPopular

• Rebooting the Device

  Instructions: Locate the Run/Tow switch under the seat Move the switch Down to the Tow position Wait 2 seconds Move the switch Up to the Run position Allow up to several minutes for the device to reconnect. UsuallSome readers

• Manual Key Mode - Recovery Mode

  Instructions: Cycle the Run/Tow switch under the seat Leave it in Run for 3 seconds Cycle the Run/Tow switch a second time Leave it in Run for 3 seconds Cycle the Run/Tow switch a final time The cart will now operate with the key Disable Recovery Mode It is possible somSome readers

• Replacing a Device

  🇩🇪 Klicken Sie hier für Deutsch Replacing a Device 1. Match the Cart Number with the Device 2. Install the new device Remove the old device Remove any old Velcro and clean with a towel - the surface mSome readers

• Reconnect Key

  Instructions: Remove the dash piece using T15 & T30 drill bits Remove the blue wire from the key. This should be the female blue wire coming from the TeeBox. Disconnect the pair of blue wires. One of these is from the TeeBox, the other is from the cart Connect the blue wire from the cart back to the key The IFew readers

• Installation Guide - Marshell/IcoCar

  Tools required: Flat head screwdriver Pliers Cleaning towel/Cloth IOTee TeeBox & Fixings Cable ties Installation Time: 3 minutes per cartFew readers